Matching entries: 0
settings...
(), "International Center for Electron Beam Technologies of E. O. Paton Electric Welding Institute, NAS of Ukraine"
BibTeX:
@electronic{Paton_www,,
  title = {International Center for Electron Beam Technologies of E. O. Paton Electric Welding Institute, NAS of Ukraine},
  url = {https://www.paton-icebt.kiev.ua/?n=mater}
}
Borkowski J, Wilk Z, Koslik P, Szymanczyk L and Zygmunt B (2018), "Application of sintered liners for explosively formed projectile charges", International Journal of Impact Engineering., August, 2018. Vol. 118, pp. 91-97. Elsevier BV.
BibTeX:
@article{Borkowski2018,
  author = {Borkowski, Jacek and Wilk, Zenon and Koslik, Piotr and Szymanczyk, Leszek and Zygmunt, Bogdan},
  title = {Application of sintered liners for explosively formed projectile charges},
  journal = {International Journal of Impact Engineering},
  publisher = {Elsevier BV},
  year = {2018},
  volume = {118},
  pages = {91--97},
  doi = {10.1016/j.ijimpeng.2018.04.009}
}
Elshenawy T, Elbeih A and Li QM (2018), "Influence of target strength on the penetration depth of shaped charge jets into RHA targets", International Journal of Mechanical Sciences., February, 2018. Vol. 136, pp. 234-242. Elsevier BV.
BibTeX:
@article{Elshenawy2018,
  author = {Elshenawy, T. and Elbeih, A. and Li, Q. M.},
  title = {Influence of target strength on the penetration depth of shaped charge jets into RHA targets},
  journal = {International Journal of Mechanical Sciences},
  publisher = {Elsevier BV},
  year = {2018},
  volume = {136},
  pages = {234--242},
  doi = {10.1016/j.ijmecsci.2017.12.041}
}
Habera Ł, Hebda K, Koslik P and Sałaciʼnski T (2020), "The shooting tests of target perforating ability, performed on cast concrete cylinders", Central European Journal of Energetic Materials., December, 2020. Vol. 17(4), pp. 584-599. Lukasiewicz Research Network - Institute of Industrial Organic Chemistry.
BibTeX:
@article{Habera2020,
  author = {Habera, Łukasz and Hebda, Kamil and Koslik, Piotr and Sałaciʼnski, Tomasz},
  title = {The shooting tests of target perforating ability, performed on cast concrete cylinders},
  journal = {Central European Journal of Energetic Materials},
  publisher = {Lukasiewicz Research Network - Institute of Industrial Organic Chemistry},
  year = {2020},
  volume = {17},
  number = {4},
  pages = {584--599},
  doi = {10.22211/cejem/132066}
}
Held M (2001), "Liners for shaped charges", Journal of Battlefield Technology. Vol. 4(3), pp. 1-6.
BibTeX:
@article{Held2001,
  author = {Held, M.},
  title = {Liners for shaped charges},
  journal = {Journal of Battlefield Technology},
  year = {2001},
  volume = {4},
  number = {3},
  pages = {1--6}
}
Hussain G, Hameed A, Hetherington JG, Malik AQ and Sanaullah K (2013), "Analytical performance study of explosively formed projectiles", Journal of Applied Mechanics and Technical Physics. Vol. 54(1), pp. 10-20. Pleiades Publishing Ltd.
BibTeX:
@article{Hussain2013,
  author = {Hussain, G. and Hameed, A. and Hetherington, J. G. and Malik, A. Q. and Sanaullah, K.},
  title = {Analytical performance study of explosively formed projectiles},
  journal = {Journal of Applied Mechanics and Technical Physics},
  publisher = {Pleiades Publishing Ltd},
  year = {2013},
  volume = {54},
  number = {1},
  pages = {10--20},
  doi = {10.1134/s0021894413010021}
}
Li W, Wang X and Li W (2010), "The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator", International Journal of Impact Engineering., April, 2010. Vol. 37(4), pp. 414-424. Elsevier BV.
BibTeX:
@article{Li2010,
  author = {Li, Weibing and Wang, Xiaoming and Li, Wenbin},
  title = {The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator},
  journal = {International Journal of Impact Engineering},
  publisher = {Elsevier BV},
  year = {2010},
  volume = {37},
  number = {4},
  pages = {414--424},
  doi = {10.1016/j.ijimpeng.2009.08.008}
}
Moran B, Glenn LA and Kusubov A (1991), "Experiments and calculations of jet penetration in glass", In Proceedings of the Combat Vehicle Survivability Symposium. Gaithersburg, MD , pp. 1-12.
BibTeX:
@inproceedings{Moran1991,
  author = {Moran, B. and Glenn, L. A. and Kusubov, A.},
  title = {Experiments and calculations of jet penetration in glass},
  booktitle = {Proceedings of the Combat Vehicle Survivability Symposium},
  year = {1991},
  pages = {1--12}
}
Pham JD, Baker EL and De Fisher S (2005), "Shaped charge jet flash radiograph digitization". Thesis at: US Army Armament Research, Development and Engineering Center. Picatinny, NJ
BibTeX:
@techreport{Pham2005,
  author = {Pham, J. D. and Baker, E. L. and De Fisher, S.},
  title = {Shaped charge jet flash radiograph digitization},
  school = {US Army Armament Research, Development and Engineering Center},
  year = {2005}
}
Salkičević M (2022), "Numerical simulations of the formation behavior of explosively formed projectiles", Defense and Security Studies., January, 2022. Vol. 3, pp. 1-14. Research and Development Academy.
BibTeX:
@article{Salkicevic2022,
  author = {Salkičević, Minel},
  title = {Numerical simulations of the formation behavior of explosively formed projectiles},
  journal = {Defense and Security Studies},
  publisher = {Research and Development Academy},
  year = {2022},
  volume = {3},
  pages = {1--14},
  doi = {10.37868/dss.v3.id183}
}
Voitenko Y, Zakusylo R and Zaychenko S (2021), "Influence of the striker material on the results of high-speed impact at a barrier", Central European Journal of Energetic Materials. Vol. 18(3), pp. 405-423. Lukasiewicz Research Network - Institute of Industrial Organic Chemistry.
BibTeX:
@article{Voitenko2021,
  author = {Yuri Voitenko and Roman Zakusylo and Sergiy Zaychenko},
  title = {Influence of the striker material on the results of high-speed impact at a barrier},
  journal = {Central European Journal of Energetic Materials},
  publisher = {Lukasiewicz Research Network - Institute of Industrial Organic Chemistry},
  year = {2021},
  volume = {18},
  number = {3},
  pages = {405--423},
  doi = {10.22211/cejem/142615}
}
Voumard C, Roduner H, Santschi WR and Wisler H (2001), "Performances and behaviour of WCu-pseudo-alloy shaped charges with a simple model for calculating the stand-off curve", In Proceedings of 19th International Symposium on Ballistics. Vol. 1. Interlaken, Switzerland DEStech Publications.
BibTeX:
@inproceedings{Voumard2001,
  author = {Claude Voumard and H. Roduner and W. R. Santschi and H. Wisler},
  title = {Performances and behaviour of WCu-pseudo-alloy shaped charges with a simple model for calculating the stand-off curve},
  booktitle = {Proceedings of 19th International Symposium on Ballistics. Vol. 1},
  publisher = {DEStech Publications},
  year = {2001}
}
Walters W (2007), "Introduction to shaped charges" Aberdeen Proving Ground, MD Army Research Laboratory.
BibTeX:
@book{Walters2007,
  author = {W. Walters},
  title = {Introduction to shaped charges},
  publisher = {Army Research Laboratory},
  year = {2007}
}
Walters W, Gooch W and Burkins M (2001), "The penetration resistance of a titanium alloy against jets from tantalum shaped charge liners", International Journal of Impact Engineering., December, 2001. Vol. 26(1–10), pp. 823-830. Elsevier BV.
BibTeX:
@article{Walters2001,
  author = {Walters, William and Gooch, William and Burkins, Matthew},
  title = {The penetration resistance of a titanium alloy against jets from tantalum shaped charge liners},
  journal = {International Journal of Impact Engineering},
  publisher = {Elsevier BV},
  year = {2001},
  volume = {26},
  number = {1–10},
  pages = {823--830},
  doi = {10.1016/s0734-743x(01)00135-x}
}
Xu QZ, Yin JP, Wang ZJ, Yi JY and Dong FD (2018), "Effect of a liner material on the formation of the wrapping explosively-formed penetrator", Strength of Materials., January, 2018. Vol. 50(1), pp. 54-62. Springer Science and Business Media LLC.
BibTeX:
@article{Xu2018,
  author = {Xu, Q. Z. and Yin, J. P. and Wang, Z. J. and Yi, J. Y. and Dong, F. D.},
  title = {Effect of a liner material on the formation of the wrapping explosively-formed penetrator},
  journal = {Strength of Materials},
  publisher = {Springer Science and Business Media LLC},
  year = {2018},
  volume = {50},
  number = {1},
  pages = {54--62},
  doi = {10.1007/s11223-018-9942-4}
}
Баум ФА, Орленко ЛП, Станюкович КП and Шехтер БИ (1975), "Физика взрыва" Москва Физматлит.
BibTeX:
@book{Stanyukovich1975,
  author = {Баум, Ф. А. and Орленко, Л. П. and Станюкович, К. П. and Шехтер, Б. И.},
  editor = {К. П. Станюковича},
  title = {Физика взрыва},
  publisher = {Физматлит},
  year = {1975}
}
Войтенко ЮИ and Бугаец ВП (2016), "Влияние алюминия на ударные свойства композитных кумулятивных струй", Вісник НТУУ «КПІ». Серія «Гірництво». (30), pp. 36-48.
BibTeX:
@article{Voitenko2016,
  author = {Ю. И. Войтенко and В. П. Бугаец},
  title = {Влияние алюминия на ударные свойства композитных кумулятивных струй},
  journal = {Вісник НТУУ «КПІ». Серія «Гірництво»},
  year = {2016},
  number = {30},
  pages = {36--48},
  doi = {10.20535/2079-5688.2016.30.67626}
}
Войтенко ЮІ, Бойко ВВ, Костюк ОО, Сидоренко ЮМ and Гошовський СВ (2022), "Сучасні кумулятивні заряди і шляхи підвищення їх ефективності", Гідродинаміка і акустика. Vol. 2(92)(3), pp. 256-272.
BibTeX:
@article{Voitenko2022,
  author = {Войтенко, Ю. І. and Бойко, В. В. and Костюк, О. О. and Сидоренко, Ю. М. and Гошовський, С. В.},
  title = {Сучасні кумулятивні заряди і шляхи підвищення їх ефективності},
  journal = {Гідродинаміка і акустика},
  year = {2022},
  volume = {2(92)},
  number = {3},
  pages = {256--272}
}
Войтенко ЮІ, Гошовський СВ, Костюк ОО and Пасічник АМ (2023), "Про оптимальні конструкції і матеріали кумулятивних зарядів для деяких практичних застосувань", Технічна інженерія., July, 2023. (1(91)), pp. 287-297. Zhytomyr Polytechnic State University.
BibTeX:
@article{Voitenko2023,
  author = {Войтенко, Юрій Іванович and Гошовський, Сергій Володимирович and Костюк, Олександр Олексійович and Пасічник, Андрій Михайлович},
  title = {Про оптимальні конструкції і матеріали кумулятивних зарядів для деяких практичних застосувань},
  journal = {Технічна інженерія},
  publisher = {Zhytomyr Polytechnic State University},
  year = {2023},
  number = {1(91)},
  pages = {287--297},
  doi = {10.26642/ten-2023-1(91)-287-297}
}
Гонтар ПА, Терентьєв ОМ and Шукуров А (2016), "Енергетичні параметри кумулятивного вибухового ядра під час вибухо-механічного буріння", Наукові вісті НТУУ «КПІ»., October, 2016. (5), pp. 17-23. Kyiv Politechnic Institute.
BibTeX:
@article{Terentiev2016,
  author = {Гонтар, П. А. and Терентьєв, О. М. and Шукуров, А.},
  title = {Енергетичні параметри кумулятивного вибухового ядра під час вибухо-механічного буріння},
  journal = {Наукові вісті НТУУ «КПІ»},
  publisher = {Kyiv Politechnic Institute},
  year = {2016},
  number = {5},
  pages = {17--23},
  doi = {10.20535/1810-0546.2016.5.71981}
}
Круглов ПВ and Колпаков ВИ (2017), "Закономерности взрывного формирования удлиненных высокоскоростных элементов из стальных сегментных облицовок", Инженерный журнал: наука и инновации., January, 2017. (12(72)) Bauman Moscow State Technical University.
BibTeX:
@article{Kruglov2017,
  author = {Круглов, П. В. and Колпаков, В. И.},
  title = {Закономерности взрывного формирования удлиненных высокоскоростных элементов из стальных сегментных облицовок},
  journal = {Инженерный журнал: наука и инновации},
  publisher = {Bauman Moscow State Technical University},
  year = {2017},
  number = {12(72)},
  doi = {10.18698/2308-6033-2017-12-1714}
}
Сидоренко ЮМ (2005), "Методика двумерного компьютерного моделирования процессов функционирования осколочно-фугасных боеприпасов", Артиллерийское и стрелковое вооружение. (1), pp. 18-21.
BibTeX:
@article{Sidorenko2005,
  author = {Сидоренко, Ю. М.},
  title = {Методика двумерного компьютерного моделирования процессов функционирования осколочно-фугасных боеприпасов},
  journal = {Артиллерийское и стрелковое вооружение},
  year = {2005},
  number = {1},
  pages = {18--21}
}
Тимошенко АБ and Чепков ІБ (2011), "Моделювання функціонування бойових частин, що містять снарядоформуючі елементи", Військово-технічний збірник., December, 2011. (5), pp. 71-78. Hetman Petro Sahaidachnyi National Army Academy.
BibTeX:
@article{Tymoshenko2011,
  author = {Тимошенко, А. Б. and Чепков, І. Б.},
  title = {Моделювання функціонування бойових частин, що містять снарядоформуючі елементи},
  journal = {Військово-технічний збірник},
  publisher = {Hetman Petro Sahaidachnyi National Army Academy},
  year = {2011},
  number = {5},
  pages = {71--78},
  doi = {10.33577/2312-4458.5.2011.71-78}
}
Федоров СВ (2007), "К определению глубины проникания пористых ударников при гиперскоростном взаимодействии", Журнал технической физики. Vol. 77(10), pp. 131-134.
BibTeX:
@article{Fedorov2007,
  author = {Федоров, С. В.},
  title = {К определению глубины проникания пористых ударников при гиперскоростном взаимодействии},
  journal = {Журнал технической физики},
  year = {2007},
  volume = {77},
  number = {10},
  pages = {131--134}
}